Auto Diagnostic & Electrical Tools
10 itemsFuses, relays, OBD cabling and test gear for tracking down electrical faults. A mix of vehicle-specific replacement parts
Fuses, relays, OBD cabling and test gear for tracking down electrical faults. A mix of vehicle-specific replacement parts — blade fuses and relay modules matched to a model — and generic diagnostic tools that work on any OBD2 car.
Auto Diagnostic & Electrical Tools — fitment at a glance
| SKU | Part | Fits / application |
|---|---|---|
| TL1866 | Wear Resistant Multi Amp Vehicle Circuit Safety Fuse Module | Acura TLX TLX-L |
| CAR1699 | 38232-SNA-A11 Multi Block Fuse | 2006-2011 Honda Civic Hybrid 30A Replacement |
| CAR1985 | 16-Pin OBD2 Y Splitter Extension Cable, Flat Ribbon Cable with 1 Male Plug and | OBD2 Accessories |
| TL1885AS | 330-Piece Automotive Blade Fuse Assortment, Mini and Standard Fuses, 2A–40A, w | Cars, Trucks, Boats and RVs |
| TL1738OG | 12V/24V Automotive Relay Tester, 4-Pin/5-Pin Relay Diagnostic Checker with Bat | See listing |
| — | Automotive Wire Tracer and Circuit Fault Finder, DC 6–42V Short and Open Circu | See listing |
| CAR1601_CH | VW Roof Grab Handle and Sun Visor Removal Tool, T10518A Angled Clip Release To | See listing |
Fits / application is taken word for word from each listing title on 2026-10-23. Where a row says “See listing”, the title states no specific vehicle — check the product page. Vehicle names describe compatibility only; we are not affiliated with any vehicle manufacturer.
Frequently asked questions
Is a fuse listed for one car usable in another?
Only if the rating and the physical size match. A fuse listed against a model is there because that car uses that rating and footprint; substituting a different amperage is how wiring gets damaged.
Do the OBD2 cables work with any scanner?
They pass the standard 16-pin OBD2 signals through, so any scanner using the same protocol works. Splitters and extensions do not change the data.
Do I need the relay tester or can I test with a multimeter?
A multimeter shows coil resistance but not whether the contacts close under load. The tester cycles the relay and reports pass/fail, which is faster when you have a box of suspect relays.
Buying guides for this category
- Upstream vs Downstream Oxygen Sensor: Which One Failed, and What to Re
- Blown Fuse? How to Find the Right One Without Guessing
- Two Devices on One OBD2 Port: What a Splitter Can and Cannot Do
Every order ships with a free gift — added to your cart automatically, no code, no minimum.
